Product Features
The motors shall be designed and tested iaw: national electric manufacturers associatio (nema) publication no. Mg1 and other requirements as specified on this drawing // the motor shall have 3 wires, phase a, b & c, 84"+-1, 12 awg, with terminal lugs, ms25036-156 and 2 wires, p1 & p2, 72"+-1, 18 awg, with terminal lugs, ms25036-101 // specifications: a. Voltage(208/230 volt +10% -5%) x b. Frequency(50/60 hz +-5%) x c. Phase(3) x d. Weight(40 lbs max) x e. Horsepower & speed(2 brake horsepower at 1725 rpm min., continuous rating) x f. Efficiency(75% min)
Detail Specifications
Overall Height:
6.750 inches
Overall Length:
13.500 inches
Overall Width:
8.188 inches
Keyway Width:
0.188 inches single end and 0.190 inches single end
Keyway Depth:
0.092 inches single end and 0.094 inches single end
Shaft Diameter:
0.625 inches single end
Keyway Length:
1.440 inches single end
End Application:
Force provider (used on: 4120-01-413-7835)
Shaft Rotation Direction:
Counterclockwise single end
Inclosure Feature:
Fungus proof and waterproof
Mounting Method:
Fixed base and face
Mounting Facility Type And Quantity:
4 unthreaded hole
Length Of Shaft From Housing:
2.000 inches single end
Shaft Center To Mounting Surface Distance:
3.500 inches single end
Center To Center Distance Between Mounting Facilities Parallel To Length:
5.000 inches
Center To Center Distance Between Mounting Facilities Parallel To Width:
4.875 inches
Shaft End Characteristic:
A9 single style single end
Part Name Assigned By Controlling Agency:
Item name: motor, evaporator
Terminal Type And Quantity:
5 wire lead and 5 solderless lug
Item Name:
Motor,induction
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
